Transforming Waste Challenges into Sustainable Energy Solutions

Waste-to-energy recovers the value held in waste that cannot be recycled and converts it into electricity, heat or biogas — within systems governed by strict environmental controls that complement waste reduction and recycling.

A modern power facility on the coast surrounded by trees and green space
Illustrative image

Why waste-to-energy?

Cities around the world face growing pressure in managing municipal solid waste. Population growth, urban expansion and changing consumption push waste volumes up year after year, while the land available for landfill shrinks and the environmental requirements attached to it tighten.

In many countries landfill remains the most common option, despite the methane it emits, the risk of leachate reaching soil and groundwater, and the land it takes from other uses. This is where energy recovery comes in: as a way to treat the residual waste that remains after sorting and recycling.

These systems are not meant to compete with recycling. Their role is to deal responsibly with what cannot be recycled technically or economically, turning it into a local source of energy while greatly reducing the volume that reaches landfill.

How does waste become energy?

Details vary by technology and project, but most energy-recovery systems follow five main stages.

  1. Waste collection and reception

    Waste is delivered to the facility on regular schedules and weighed on arrival to record quantities and sources, then unloaded in an enclosed reception area designed to limit odour and dust.

  2. Inspection, sorting and preparation

    Waste is inspected to remove unsuitable or hazardous items, recyclables such as metals are recovered, and the remainder is mixed, shredded or prepared to suit the chosen conversion technology.

  3. Thermal or biological conversion

    Waste is treated with the technology that suits its nature: controlled combustion for mixed waste, anaerobic digestion for organic waste, or gasification for prepared feedstock with defined properties.

  4. Energy recovery and power generation

    Energy is recovered as steam that drives a turbine and generator, or as biogas fired in gas engines. Remaining heat can be used for district heating or industrial processes.

  5. Environmental treatment and residue management

    Process gases are cleaned before release under continuous monitoring, and solid residues such as ash and digestate are managed according to regulations, recovering whatever can be recovered.

The waste reception bunker inside an enclosed treatment facility
Illustrative image
Compressed cardboard bales prepared for recycling in front of green trees

Waste-to-energy technologies

No single technology suits every project. The choice depends on the type, quantity and properties of the waste and on the regulatory and economic conditions of each site — and no project necessarily uses all of the technologies below.

12345
How it works

Tap any stage to highlight it in the drawing.

Controlled combustion with energy recovery

The most widely used technology for mixed municipal waste. Waste burns on a moving grate under controlled temperature, air supply and residence time, and the heat is recovered in a boiler to raise steam.

Suitable feedstock
Mixed municipal waste and some non-hazardous commercial and industrial waste.
Outputs
Electricity, heat for district or industrial use, and treatable bottom ash.
Considerations
Requires an advanced flue-gas cleaning system and a steady year-round waste supply.

Supporting systems

  • Energy recovery equipment

    Boilers, steam turbines, generators and heat exchangers, or biogas engines. Their design determines how much energy is recovered and how efficient the facility is.

  • Flue-gas treatment

    Successive stages that typically include nitrogen-oxide control, dry, semi-dry or wet acid-gas treatment, activated-carbon injection, and fabric filters that capture fine particles.

  • Environmental monitoring

    Continuous monitoring systems measure key pollutants in real time, alongside periodic sampling and reporting to regulators as the permit requires.

  • Residue management

    Bottom ash is processed to recover metals and may be used in construction applications where regulations allow, while flue-gas cleaning residues require specialised treatment and disposal.

Our approach to waste-to-energy projects

We aim to support municipalities, industry and investors across the whole project journey — from understanding the waste to running an integrated, responsible system.

Treatment and energy recovery

Thermal or biological treatment facilities that recover the energy stored in suitable municipal and industrial waste and turn it into electricity and heat.

  • Assessing waste volumes and calorific value
  • Choosing the right treatment technology for each site
  • Design that balances efficiency and emissions

Integrated systems

One system that links collection, sorting, recycling, energy recovery and grid connection — instead of disconnected fixes.

  • Waste management linked to energy production
  • Recovery of metals and recyclable materials
  • Integration with power and heating networks

Responsible development

An approach that puts safety, environmental standards and transparency with communities at the heart of every phase, from study to operation.

  • Alignment with international emissions standards
  • Performance monitoring and reporting
  • Planning with local communities, not just for them

Project development: from idea to operation

A waste-to-energy project moves through successive phases, each building on the results of the last. Good early study leads to sounder decisions in design and operation.

  1. Waste analysis

    Measuring quantities and seasonal variation, and establishing composition, calorific value and moisture.

  2. Feasibility study

    Assessing technical and economic feasibility and revenue scenarios from energy sales and gate fees.

  3. Site requirements

    Land area, access, grid proximity, water supply and safe distances from residential areas.

  4. Technology selection

    Matching the technology to the waste properties, project scale and regulatory framework.

  5. Environmental assessment

    Environmental and social impact study, stakeholder consultation and permitting.

  6. Engineering design

    Concept then detailed design of the facility and its systems to recognised standards.

  7. Construction coordination

    Managing procurement, installation, contractors, schedules and site safety requirements.

  8. Grid connection

    Coordinating the electrical connection with the grid operator and power-purchase arrangements where applicable.

  9. Commissioning

    Performance and emissions testing before commercial operation and facility handover.

Aerial view of white anaerobic digestion tanks in a green field
Illustrative image

Environmental considerations

A facility's environmental footprint depends as much on its design and operation as on the technology itself.

  • Landfill diversion

    Reducing the waste sent to landfill, along with its methane and leachate.

  • Resource recovery

    Recovering metals and recyclable materials before and after treatment.

  • Emissions controls

    Multi-stage cleaning and continuous monitoring to stay within permitted limits.

  • Treatment residues

    Managing ash and cleaning residues safely and in line with regulations.

  • Energy efficiency

    Raising the share of energy recovered, especially when both power and heat are used.

  • Regulatory compliance

    Meeting permit conditions and reporting environmental performance to the authorities.

The actual environmental benefits of any project depend on its design, the applicable regulations, the characteristics of the waste and operational performance. We therefore treat every environmental estimate as the outcome of a project-specific study, never as an assumption.

Applications

How suitable each waste stream is depends on its composition, quantity and long-term stability.

  • Municipal solid waste

    The main input for controlled-combustion facilities, after recyclables are sorted out.

  • Suitable commercial waste

    Non-hazardous waste from markets, offices and hospitality, where it meets the facility's specifications.

  • Suitable industrial waste

    Certain non-hazardous industrial residues with known properties, after technical assessment.

  • Organic feedstocks

    Food waste and agricultural and food-industry residues — best suited to anaerobic digestion.

Sustainability and the circular economy

In the waste hierarchy, energy recovery comes after prevention, reuse and recycling, and before final disposal. That order defines its role clearly: treating what remains once the higher options are exhausted, not competing with them.

That is why we believe the best waste-to-energy projects are designed within an integrated waste-management system — one that supports source separation and recycling programmes and is sized for expected future volumes, not just today's.

The waste hierarchy — from most to least preferred
  1. Prevention
  2. Reuse
  3. Recycling
  4. Energy recovery
  5. Disposal

Frequently asked questions

Is waste-to-energy an alternative to recycling?

No. Energy recovery complements recycling rather than replacing it. It treats the residual waste left after sorting — the part that is technically or economically difficult to recycle. Facilities are best sized to leave room for recycling rates to grow in future.

What minimum quantity of waste does a project need?

There is no fixed figure. A viable scale depends on the technology, local energy prices, gate fees and the regulatory framework. It is established in the feasibility study after analysing waste quantities, composition and the stability of supply over the operating life.

What is the difference between controlled combustion and gasification?

Controlled combustion fully oxidises the waste and recovers the heat in a boiler; it is the most widely used option for mixed waste. Gasification works with limited oxygen to produce a synthesis gas, usually needs prepared and uniform feedstock, and requires careful case-by-case evaluation.

Do these facilities pollute the air?

In many countries modern facilities are subject to strict emission limits and rely on multi-stage cleaning systems and continuous monitoring. Actual performance depends on the quality of design, operation and maintenance, and on the operator's compliance with permit conditions.

What happens to the ash after treatment?

Bottom ash is usually processed to recover ferrous and non-ferrous metals and may be used in construction applications where regulations allow. Flue-gas cleaning residues are generally classified as requiring specialised treatment and disposal.

When is anaerobic digestion the better option?

When there is a sufficient supply of separated organic waste, such as food, market, food-industry and farm residues. It produces biogas and a usable digestate, but it is not suited to mixed waste.

How long does a project take from study to operation?

It varies with project size, technology and each country's permitting requirements. Projects typically move through study, permitting, design, construction and commissioning, which can take several years for large facilities.

Explore Waste-to-Energy Opportunities

Share initial information about your waste quantities, waste types and project location, and we will help you identify the right next steps for a study.